Buy Simple Shear Cutting Finisher - Carbide Wood Turning & Hollowing Tool with 16mm (5/8") Handle

Simple Shear Cutting FinisherTM Carbide Tipped Lathe Tool. Turning wood with the Simple Shear Cutting FinisherTM that's offered here is as simple as these 4 steps. 1. Position the tool rest as close to the work as possible so the carbide cutter is at the lathe center line. 2. Place the tool on the tool rest with the tool shaft parallel with the floor. 3. Rotate the tool handle about its axis (similar to twisting a motorcycle throttle) approximately 35° in the direction you will be cutting. 4. While securely holding the tool slowly plunge the carbide cutter into the work. As you begin to move

Simple Shear Cutting Finisher - Carbide Wood Turning & Hollowing Tool with 16mm (5/8") Handle

qwqwqw/B0036Z4AQG/ttttt gggggg/41IwrnL7TyL.jpgqqqq

==>> Check Today PRICE <<==ccccc

Simple Shear Cutting Finisher - Carbide Features :

• The modern alternative to conventional bowl and spindle gouges
• The introduction of carbide tipped wood turning tools has greatly simplified wood turning.
• Gone forever is the long learning curve where precise angles and special tool presentation techniques must be mastered. Also gone is the need to master many sharpening techniques before you can even begin to turn, not to mention the expense of all that sharpening equipment.
• With Simple Wood Turning Tools it's all turning and no sharpening so you can start turning immediately.
• The Simple Shear Cutting FinisherTM provides the very best surface finish possible with a carbide tipped wood turning tool.

qwqwqw/B0036Z4AQG/ttttt ccccc

Simple Shear Cutting Finisher Reviews,

10 out of 10 based on 98 ratings